Wraptor A6200 User Manual 2
Introduction
System Requirements
Environmental Ranges
Exposing the printer to direct sunlight is not recommended.
Materials Storage Specifications
Label supplies and ribbon for use with this unit must be stored in its original packaging in an
environment in which the temperature is below 80°F and 60% relative humidity.
Electrical Specifications
System Requirements
Following are the recommended requirements for the computer on which you install the Wraptor
A6200 Printer Driver:
• Operating system:
• Microsoft® Windows® 7
• Microsoft Windows 8
• Microsoft Windows 10
Safety
The following information is necessary for the safe operation of the Wraptor A6200 printer. Be sure to
read this section prior to setting up or operating the printer.
Environmental Operation Storage
Temperature* 50 to 105°F (10 to 40.6°C) 0 to 140°F (-18 to 60°C)
Relative Humidity 20 to 80% non-condensing 10 to 95% non-condensing
* Performance decreases for B427 labels above 80°F (26.7°C). (B427 labels
are self-laminating translucent vinyl labels.)
Input Voltage to Adapter 100 - 240 V~
Current to Adapter 1.5 A
Frequency to Adapter 50/60 Hz
Input Voltage to Printer 18 V DC
To Next Page
Loading...
