Brady Wraptor A6200 - Nothing Happens When I Place a Wire in the Jaws; No Print Jobs Are in the Printer

Wraptor A6200 User Manual 51
Troubleshooting
Nothing happens when I place a wire in the jaws
Nothing happens when I place a wire in the jaws
Problem: I sent a file to the printer, but when I put a wire in the jaws, nothing happened.
Solutions:
• When inserting the wire, make sure that the trigger bars are pressed in fully. See “Printing and
Wrapping” on page 27 .
• Make sure the print job is added to the queue and that the job is running. See “Printing: Details” on
page 29 . Alternatively, turn the Auto Queue Job setting on so that jobs are automatically placed in
the queue when received. See “Print Queue” on page 35 .
• The trigger sensors may need to be cleaned. See “Cleaning the Sensors” on page 43
No print jobs are in the printer
Problem: I printed a file to the Wraptor A6200 printer from Brady Workstation software, but when I tap
Print Jobs on the touch screen, no jobs are listed.
Solutions:
• Make sure the file location is set to Internal Memory . See “File Location” on page 8 .
• Make sure the communication settings are correct. See “Connecting the Printer” on page 12 .