Wraptor A6200 User Manual 54
Regulatory Compliance
Wireless Regulatory Information
China
China RoHS Hazardous Substance Table related to this product is available at
www.bradyid.com/A6200compliance.
Wireless Regulatory Information
Applies to the Wi-Fi radio module only included in printer models that support wireless communication.
Regulatory markings, subject to country certification, are applied to host printer signifying Wi-Fi (radio)
approvals have been obtained.
United States
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
WARNING! Operation of the device without regulatory approval is illegal.
Radio protocol WLAN IEEE 802.11b/g/n
RF Operating Frequency 2.4 – 2.495 GHz
RF Output Power < +20dBm EIRP (100mW)
Antenna Type \ Antenna Gain PCB trace antenna \ -3.06 dBi
Environmental Operation -40 to 85° C (-40° to 185° F)
Note: Be mindful of the maximum operating
temperatures for the printer. See “Environmental
Ranges” on page 2.
Environmental Storage -55 to 125° C (-67° to 257° F)
Note: Be mindful of the maximum storage
temperatures for the printer. See “Environmental
Ranges” on page 2.
To Next Page
Loading...
