www.bresser.de
Preview: If you check the [Preview] box, you can preview your model after it
has been sliced.
Print when Slice Done: If you are printing via a USB cable, you can check this
box to print the model as soon as it is sliced. When printing via USB, selecting
this option is not recommended.
Machine type: Bresser REX II
Supports: When printing a model with supports, you should click the downward
triangle and select [Enable].
Raft: It is recommended to activate this option for a base plate via [Enable].
Resolution: It is recommended that you select [Standard] for the resolution.
More Options: Among the other options, it is recommended to keep the default
settings.
Click [OK] to select the path to save the Gcode file. You can name the file any
way you like and specify it for the file format G or GX. Click [Save] to create a
Gcode file.
7-6
NOTE: A preview can be displayed for GX files, but not for G files. The files are
displayed as follows:
To Next Page
Loading...
