EasyManua.ls Logo

Brodersen RTU32M Series User Manual

Brodersen RTU32M Series
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Version 1.65.5.54 - August 2018
RTU32M Series
Modular RTU, PLC and Utility Controller
User Manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Brodersen RTU32M Series and is the answer not in the manual?

Brodersen RTU32M Series Specifications

General IconGeneral
BrandBrodersen
ModelRTU32M Series
CategoryController
LanguageEnglish

Summary

Getting Started

3.1 Initial Setup and Connection

Details default settings, PC preparation, wiring, and first-time configuration.

RTU32M Configuration and Operation

4.1 PC Connectivity and Initial Setup

Guides on wiring, PC Ethernet setup, and first-time configuration.

4.4 System Features and Settings

Covers licensing, drivers, system overview, hardware, and user interface.

4.9 Runtime Settings

Manages main settings, startup, options, and redundancy configurations.

4.12 Network Configuration and Redundancy

Details network settings, redundancy protocols, bonding, and adapters.

4.18 Advanced Network and Time Settings

Explains VPN settings and real-time clock synchronization.

4.20 Maintenance and Security

Covers user administration, firmware updates, licensing, password, and reboot.

Getting Started with Brodersen WorkSuite

RTU32M I/O Setup in WorkSuite

Distributed Event Binding Protocol

7.3 Setting up Binding in WorkSuite

Provides a procedure for configuring binding and redundancy within WorkSuite.

RTU32M Cycle Time

RTU HMI

RTU Monitoring Applications

RTU Utilities and System Event Log

RTU32M Technical Description

Appendix 1 – RTU32M Factory Reset

RTU32M Complete Reset Procedure

Step-by-step guide to perform a factory reset and restore default settings.