RTU32M Series User Guide
Brodersen A/S, Islevdalvej 187, DK-2610 Roedovre, Denmark, Tel: +45 45 35 26 27, Fax: +45 45 35 26 29, Email: sales@Brodersen.com
August 2018
4.4 RTU32M – Licensing
The RTU32M includes license options that manage the tag quantity and enable use of advanced drivers and options, hence some
restrictions may be imposed, including limiting the number of project variables, drivers and driver tags/data points. The System
Overview page includes information about the licensing, as shown in the example below.
The license limitations are managed by the firmware of the RTU32M. If you try to start a logic application in the RTU32M that exceeds
these limits, the project will NOT start and an info message in the Runtime info window in WorkSuite will indicate the status of the
limits in your project. Every time you start a runtime project the current status will be shown in the Runtime message window
To Next Page
Loading...
Need help?
General