RTU32M Series User Guide
Brodersen A/S, Islevdalvej 187, DK-2610 Roedovre, Denmark, Tel: +45 45 35 26 27, Fax: +45 45 35 26 29, Email: sales@Brodersen.com
August 2018
4.18 VPN Settings
The RTU VPN Client supports PPTP and L2TP (IPsec) for up to VPN Servers. The settings for each VPN server interface can be adjusted
using the webpage.
In order to ensure the VPN client is working you will need to enter all credentials correctly. The webpage includes small help icons - just
put the cursor on them and you will get details for each point. Controlling the connection of the VPN Client is done from the RTU logic
application. Use the Function Block ConnectVPN found in the Dial-up function group to manage the VPN connections
Note: the VPN page is disabled in the early release firmware
for the RTU32M (available 3Q 2018).
To Next Page
Loading...
Need help?
General