Brooks 9600 - Compressor Inspection; Compressor; Helium OFF Condition Pressure Verification; Shipping Carton Contents

2-2 ©2013 Brooks Automation Inc. Pub. No. 8040444, Rev. AA, 01/14/2013 ECO No. 63723
6. Carefully roll the Compressor down the ramp and onto the floor.
Compressor Inspection
Inspect the Compressor for visible signs of damage as indicated in the
following paragraphs.
Compressor
Inspect the exterior of the Compressor for visible signs of damage,
evidence of an oil leak, and check the Helium Pressure Gauge for proper
helium pressure. Report any damage to the shipping company at once.
Helium "OFF" Condition Pressure Verification
Refer to “Section 4 - Operation” for more information on the "OFF"
Condition helium charge pressure of the 9600 Compressor.
Shipping Carton Contents
The shipping carton should contain the following items:
• Compressor
• Two barbed fittings for flexible water lines
• Installation, Operation, and Maintenance manual
• Compressor remote start connector and strain relief