Brother ADS-1300 - Page 23

• If an error message or notification appears in the information bar, press the message area to view the
details.
- The warning icon appears when there is an error or maintenance message.
- The information icon appears when there are helpful hints or supplementary information
available.
• This product adopts the font of ARPHIC TECHNOLOGY CO., LTD.
Auto Start Scan
The Auto Start Scan feature allows you to start scanning automatically as soon as a document is placed in the
ADF.
To use Auto Start Scan, you must first create an Auto Start Scan Shortcut, and then enable the Auto Start Scan
setting in [General Setup]:
1. Press [Shortcuts].
2. Press d to display [Auto Start Scan].
3. Press to add the Auto Start Scan Shortcut.
4. Select the Shortcut function (for example, Scan to PC).
5. Press [Save as Shortcut]. When the LCD displays [These settings will be saved as a
shortcut.], press [OK].
6. Enter the Shortcut Name and press [OK]. When the LCD displays [Make this a One Touch
Shortcut?], press [OK].
7. Press
([Settings]) to access the Settings menu. Press [General Setup] > [Auto Start Scan
Mode] and select [On].
18