Brother BAS-340 - Idisassemb Ly I; []] Machine Covers

DISASSEMBLY
lii Machine covers
1) Remove the screws. Then remove the side cover 0, belt covers (U) @ and (D) @), and the Y -feed guide
shaft cover
0.
2) Remove the screw and the table rear cover@ with guide shaft cover (R)@.
3) Remove the screw and the bellow assembly fl.
4) Remove the screw and X-feed bracket covers (R) @) and (L) @).
5) Remove the screw and XY -feed base covers (R) 4li> and (L) ID.
6) Remove the screw and the top co.ver 0.
7) Remove the plunger pin @of the thread wiper solenoid, the screw, the eye guard ID and the face plate
@.
-8-
From the library of: Superior Sewing Machine & Supply LLC