Brother BAS-340 - Traverse Feed Mechanism (X Axis)

00 Traverse feed mechanism (X axis) (1)
r
!
1) Remove the bolts@) of X-feed guides (F) 0 and (R) @.
2} Remove the screw 0 of the X-feed bracket e I the belt holder @ and the timing belt spacer fJ from the
X-timing belt@). (The machine head should be standing.}
3} Remove the screws ® of the X-stopper @,then X-feed guides (F) 0 and (R} @
1
the X-retainer ID and X-
feed bracket e.
-16-
From the library of: Superior Sewing Machine & Supply LLC