Brother BAS-340 - Feed Mechanism (X Axis) (y Axis)

@1 Feed mechanism (X axis)
1) The oscillation of the actuating gear@ attached to pulse motor X 0 is transmitted to the idle gear@).
2) The oscillation of the idle gear @ is transmitted to timing pulley A €) attached to X-pulley shaft (L) 9
and the to the X-timing belt @.
3) . The X-feed bracket fl fixed on the X timing belt @ moves right and left (in the X direction) through the
X-retainer@ and X-feed guide (F) @.
Feed mechanism (Y axis)
1) The oscillation of the actuating gear @ attached on pulse motor Y 0 is transmitted to the Y-driving
shaft@.
2) The presser arm assembly @ moves via the X-feed shaft support 9 and the X-feed shaft €) which are
attached to theY-driving shaft@). The presser arm assembly@ is also attached to theY-feed bracket fl.
3) TheY-feed bracket f) oscillates in theY direction (forward and backward) with theY-retainer@ and the
Y -feed guide@.
-3-
From the library of: Superior Sewing Machine & Supply LLC