Brother BAS-340 - [§]Adjusting Movable Knife

[i) Adjusting movable knife
-45-
Loosen the nut @. Vertically adjust thread
trimmer rod (L) @) so that V notch ® of the
movable knife 0 aligns with the index on the
needle plate when the machine is stopped.
[Replacing movable knife and fixed knife]
1) Remove the screw 0, the feed plate @and the
auxiliary
sheet@).
2) Remove the screws 0 and 0 and the needle
plate €), detaching the thread trimmer
connecting rod 6 from the pin part of thread
trimmer connecting rod (L) @.
From the library of: Superior Sewing Machine & Supply LLC