Brother BAS-340 - Caution for Working U Pon Feed Plate Blank

[ll] Inner clamp assembly
External pre sser plate (H 1)
• When the inner clamping device is used with the OT presser plate, attach the OT presser to external
presser plate (H1).
Se t ting the labels and other materials to be sewn will be easier.
Caution for working upon feed plate blank
When you use the feed plate blank and add to work upon it, chamfer the back side of it as shown in the
figure below .
-88-
NOTE: For other back-side corners, chamfer at 0.3
C or more and polish them wit h the f ine
sand paper.
From the library of: Superior Sewing Machine & Supply LLC