Brother BAS-340 - Page 44

lll1 Machine covers
1) Attach the side cover 0, belt covers (D)@ and (U)@) with the screw.
2) Attach theY-feed guide shaft cover e with the screw.
3) Secure the table rear cover 0 with guide shaft cover (R) ®with the screw.
4) Attach XY-feed base covers (L) & and (R)@) with the screws.
5) Attach X-feed bracket covers (R)@) and (L) ® with the screws.
NOTE: The back screws on the X-feed bracket covers (R)@) and (L) ® should not be attached.
6) Secure the bellow assembly ID, the presser arm assembly @ and the X-feed bracket covers (R) @) and (L)
4Il> with the screws.
7) Attach the top cover® and the face plate ID with their screws respectively.
8) Attach the eye guard@ to the face plate ID with screws.
-41-
From the library of: Superior Sewing Machine & Supply LLC