4-16
Confidential
2.5 Adjustment of Ruled Lines (Maintenance mode 65)
Refer to the adjustment of ruled lines in Chapter 5 "1.3.23 Adjustment of the Vertical Print Lines/
Ruled Lines (Maintenance mode 65)" for details on the execution.
2.6 Update the Paper Feeding Correction Values (Maintenance mode 58)
Refer to Chapter 5 "1.3.19 Updating of Paper Feeding Correction Value (Maintenance mode 58)" for
details on the execution.
2.7 Margin Adjustment in Borderless Printing (Maintenance mode 66)
Refer to Chapter 5 "1.3.24 Margin Adjustment in Borderless Printing (Maintenance mode 66)" for
details on the execution.
2.8 Write Head Calibration Data (Maintenance mode 02)
Refer to Chapter 5 "1.3.2 Creating of Head Calibration Data and Writing it into Flash ROM
(Maintenance mode 02)" for details on the execution.
2.9 Check Printing
In "1.16 Check Scanning and Printing" of this chapter refer to "Update the paper feeding correction
values", "Adjustment of ruled lines", and "Margin Adjustment in Borderless Printing" for details on
the execution.
To Next Page
Loading...
