5-30
Confidential
1.3.15 Transfer of Received FAX Data and/or Equipment's Log (Maintenance mode 53)
<Function>
This function transfers received FAX data to another machine. It is useful when the machine cannot
print received data due to the printing mechanism defective. This function also transfers the activity
report, the communications list, and the equipment’ log of the machine as fax data.
Note • The number of files that can be transferred at a time is 99. To transfer 100 files or more,
carry out the following procedure more than one time.
• If there are both color and monochrome data in a file to be transferred, the monochrome
data will be transferred first. If the receiver machine does not support the color function,
the sender machine cannot transfer color data, resulting in an error.
<Operating Procedure>
(1) Press the [5] and [3] keys in this order in the initial stage of the maintenance mode.
The machine displays "FAX TRANSFER" on the LCD.
• To check the number of received files, press the [1] key.
The machine displays "1.NO. OF JOBS" on the LCD.
Press the [SET] key to display the number of received files, as in "NO. OF JOBS: 10."
• To transfer the activity report only, press the [2] key.
The machine displays "2.ACTIVITY" on the LCD.
• To transfer received files, press the [3] key.
(The activity report is also added and transferred.)
The machine displays "3.DOCUMENTS" on the LCD. Note that if there is no received file,
"NO DOCUMENTS" appears.
• To transfer the communication list for the latest communication, press the [4] key.
The machine displays "4.COM.LIST (NEW)" on the LCD.
• To transfer the communication list for the last three errors, press the [5] key.
The machine displays "5.COM.LIST (ERR3)" on the LCD.
• To transfer the maintenance information (List of Maintenance mode 77), press the [6] key.
The machine displays "6.MNT77LIST" on the LCD.
• To transfer user setting information, press the [7] key.
The machine displays "7.USER SETTINGS" on the LCD.
• To transfer the caller ID history, press the [8] key.
The machine displays "8.CALLER ID HIST" on the LCD.
• To transfer the outgoing call history, press the [9] key.
The machine displays "9.OUTGOING CALL" on the LCD.
• To transfer the radio wave condition list, press the [0] key.
The machine displays "0.WLAN DATA" on the LCD.
(2) With the machine displaying either "2.ACTIVITY", "3.DOCUMENTS", "4.COM.LIST
(NEW)", “5.COM.LIST (ERR3)", "6.MNT77LIST", "7.USER SETTINGS", "8.CALLER ID
HIST", "9.OUTGOING CALL" or "0.WLAN DATA", press the [Set] or [OK] key.
The machine displays "ENTER NO&OK" on the LCD.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
