4-21
Confidential
6 IF YOU REPLACE THE ENGINE UNIT, RECORDING PAPER FEEDING
RELATED PARTS OR MAINTENANCE UNIT
The paper feeding related parts to be adjusted after replacement are listed below.
• Engine Unit • Inner chute ASSY
• Carriage PCB ASSY • Registration sensor PCB ASSY
• Flushing box • Carriage motor ASSY
• CR encoder strip • Maintenance unit
• PF encoder disk • CR timing belt
• PF encoder sensor PCB ASSY
<Operations>
6.1 Check Head Nozzles (Maintenance mode 09)
6.2 Adjustment of Ruled Lines (Maintenance mode 65)
6.3 Update the Paper Feeding Correction Values (Maintenance mode 58)
6.4 Margin Adjustment in Borderless Printing (Maintenance mode 66)
6.5 Check Printing
<Requirements>
(1) USB flash memory or SD card: 1 piece
(2) USB cable: 1 piece
(3) Create a temporary folder in the PC's C drive (Windows XP or later).
(4) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(5) Maintenance driver (MaintenanceDriver.zip)
Make a copy of the maintenance driver in the temporary folder in the C drive. Extract the
copied file and install it. Refer to "APPENDIX 3. INSTALLING THE MAINTENANCE
PRINTER DRIVER" for details on the installation.
(6) Data files of print patterns
To Next Page
Loading...
