5. Type "control printers" in the Open: field and click OK.
The Devices and Printers window appears.
If the Devices and Printers window does not appear, click View more devices > More devices and
printer settings.
6. Click Add a device.
• To use a Windows 10 or Windows 11 computer as a Registrar, you must register it to your network in
advance. For more information, see the instructions supplied with your wireless LAN access point/
router.
• If you use Windows 10 or Windows 11 as a Registrar, you can install the printer driver after the wireless
configuration by following the on-screen instructions. To install the driver and software necessary to use
your machine, go to your model's Downloads page at support.brother.com/downloads.
7. Select your machine and click Next.
8. Type the PIN, and then click Next.
9. Click Close.
If your wireless device is connected successfully, the Power LED and Wi-Fi LED are lit.
Related Information
• Use the Wireless Network
122
To Next Page
Loading...
