Home > Machine Settings > Change Machine Settings Using Web Based Management > General
Settings > Set Sleep Mode Countdown
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep
Mode, it acts as if it is turned off. The machine will wake up and start printing when it receives a print job. Use
these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
• The timer will restart if any operation is carried out on the machine, such as receiving a print job.
• The factory setting is one minute.
1. Start Web Based Management. See Access Web Based Management.
2. In the left navigation bar, select General > Sleep Time.
If the left navigation bar is not visible, start navigating from .
3. Enter the Sleep Time field.
4. Select Submit.
Related Information
• General Settings
Related Topics:
• Set the Machine to Power Off Automatically Using Web Based Management
220
To Next Page
Loading...
