Home > Network > Wireless Network Settings > Enable/Disable Wireless LAN
Enable/Disable Wireless LAN
Related Models: DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W
1. Press (Wi-Fi) and (Stop) simultaneously.
The Power LED, Paper Warning LED, and Ink LED light up for one second, and then the Wi-Fi LED starts
flashing.
2. Press Mono Copy to enable or disable Wi-Fi.
• When Wi-Fi is enabled, the Power LED flashes once, and then the Power LED and Wi-Fi LED are lit.
• When Wi-Fi is disabled, the Power LED flashes twice, and then the Power LED is lit.
Related Information
• Wireless Network Settings
126
To Next Page
Loading...
