Home > Scan > Secure Scan
Secure Scan
Related Models: DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W
Use the Secure Scan feature to ensure that confidential or sensitive documents are not scanned until you enter
your user name and password on your computer or mobile device.
• The Secure Scan feature supports scanning from your computer or mobile device.
• This feature is available only for certain applications and online services.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your
machine's IP address).
For example:
https://192.168.1.2
You will find your machine's IP address in the Network Configuration Report.
See Print the Network Configuration Report.
3. If required, type the password in the Login field, and then select Login.
The default password to manage this machine’s settings is located on the back of the machine and marked
"Pwd". Change the default password by following the on-screen instructions when you first log in.
4. In the left navigation bar, select Network > Network > Protocol.
If the left navigation bar is not visible, start navigating from
.
5. Make sure the Network Scan checkbox is selected, and then select the Advanced Settings option.
6. Make sure the Unencrypted Scan Settings option is set to Enabled.
7. Select the Security Settings option.
8. In the Connect with Another Device field, select Enabled.
9. In the Password Settings field, type your password.
10. Select Submit.
You have completed the Secure Scan setup.
11. Load your document.
12. On your computer or mobile device, start your scan operation.
When prompted, type "123" as your user name and your registered password.
Related Information
• Scan
Related Topics:
• Access Web Based Management
94
To Next Page
Loading...
