Brother DCP-T430W - Clean the Machines Printer Platen

Home > Routine Maintenance > Clean Your Brother Machine > Clean the Machine's Printer Platen
Clean the Machine's Printer Platen
WARNING
Be sure to unplug the machine from the electrical socket before cleaning the printer platen to avoid an
electrical shock.
1. Unplug the machine from the electrical socket.
2. If the paper support flap is open, close it, and then close the paper support.
3. Pull the paper tray (1) completely out of the machine.
1
4. Lift the paper support (1), and then pull it at an angle completely out of the machine as shown by the arrow.
1
5. Squeeze both green levers together, and then lower the maintenance unit (1).
1
6. Clean the machine’s printer platen (1) and the area around it, wiping off scattered ink with a dry, soft lint-free
cloth.
1
7. Raise the maintenance unit.
194