Home > Network > Network Features > Reset the Network Settings to Factory Default
Reset the Network Settings to Factory Default
Related Models: DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W
You can use your machine's control panel to reset the machine's network settings to its default factory settings.
This resets all information except the administrator password.
You can also reset the print server to its factory settings using Web Based Management.
1. Press (Wi-Fi) and (Stop) simultaneously.
The Power LED, Paper Warning LED, and Ink LED light up for one second, and then the Wi-Fi LED starts
flashing.
2. Press and hold Colour Copy for two seconds.
3. Wait until the machine restarts and the Power LED indicator lights up before disconnecting the machine from
the power source.
Related Information
• Network Features
137
To Next Page
Loading...
