Home > Network > Network Features > Use Global Network Detection Features > Block Communications
from the Global Network
Block Communications from the Global Network
Related Models: DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W
When you enable this feature, it limits receiving jobs from devices with global IP addresses
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your
machine's IP address).
For example:
https://192.168.1.2
You will find your machine's IP address in the Network Configuration Report.
See Print the Network Configuration Report.
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the back of the machine and marked
"Pwd". Change the default password by following the on-screen instructions when you first log in.
4. In the left navigation bar, click Network > Security > Global IP Address Detection / IP Filter.
If the left navigation bar is not visible, start navigating from
.
5. In the Reject outside network packets from the Global Network option, click Disabled.
6. Click Submit.
Related Information
• Use Global Network Detection Features
Related Topics:
• Access Web Based Management
136
To Next Page
Loading...
