Brother DCP-T430W - Scan Using the Buttons on Your Brother Machine

Home > Scan > Scan Using the Buttons on Your Brother Machine > Scan Using the Buttons on Your
Brother Machine
Scan Using the Buttons on Your Brother Machine
Send scanned photos or graphics directly to your computer.
• To scan from your machine:
- You must select your machine using Brother iPrint&Scan.
- Use Brother iPrint&Scan to change scan settings, such as the file type and file storage location.
For more information, see Related Information: Change the Scan Button Settings from Brother
iPrint&Scan.
• To scan from your computer:
See Related Information: Scan Using Brother iPrint&Scan (Windows/Mac).
1. Before scanning for the first time, do the following:
a. Start Web Based Management. See Access Web Based Management.
b. In the left navigation bar, select Scan > Scan to PC.
If the left navigation bar is not visible, start navigating from
.
c. Select the scan type you want to use from the Scan to drop-down list.
d. (DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W) Select the computer you want to send the data to
from the PC Name drop-down list.
e. Select Submit.
2. Load your document.
3. Press the Mono Copy and Colour Copy buttons simultaneously.
If you are prompted to select a scanning application, select Brother iPrint&Scan from the list.
Related Information
• Scan Using the Buttons on Your Brother Machine
• Change the Scan Button Settings from Brother iPrint&Scan
Related Topics:
• Scan Using Brother iPrint&Scan (Windows/Mac)
73