Home > Routine Maintenance > Refill the Ink Tanks
Refill the Ink Tanks
Make sure to confirm the actual amount of remaining ink visually by looking through the window (1) of the ink
tank. If the remaining ink level is at or below the lower line (2) under the minimum fill mark, refill the ink tank.
The ink below the lower line is necessary to prevent air from drying out and damaging the print head assembly.
Refill the ink tank when the remaining ink level is at or below the lower line.
CAUTION
If ink gets into your eyes, rinse them with water immediately. If left as it is, it may cause red eye or mild
inflammation. In case of any abnormality, consult your doctor.
IMPORTANT
• We recommend using genuine Brother supplies to ensure stable print quality and performance. Although
not all non-genuine supplies may cause quality issues, it is possible that some may adversely affect print
quality or cause machine malfunction. Brother may charge for repairing your machine if it is proven that
non-genuine supplies caused the damage, even if the machine is still covered by the warranty.
• The supply model number varies depending on your country and region. For more information, visit
go.brother/original.
• Check the ink bottle model name on the label. Using the incorrect ink may cause damage to the machine.
BTD100BK
BTD100CMY
1. Open the ink tank cover (1).
182
To Next Page
Loading...
