2. Remove the ink tank cap for the colour you want to refill, and place it inside the back of the cover, as shown.
NOTE
Be careful to avoid touching any ink when handling the ink tank cap.
3. Remove the ink bottle cap.
IMPORTANT
DO NOT shake the ink bottles. If ink stains your skin or clothing, wash with soap or detergent at once.
4. Make sure that the colour of the ink tank cap matches the ink colour you want to refill.
Align the bottle so that the pin on the ink tank can be inserted into the hole in the bottle, as shown in (1).
Slide the bottle onto the pin at the angle shown in (2) until the cap is flush with the ink tank surface.
(You will hear a click sound when you insert it for the first time.)
5. The bottle will support itself when in the correct position and the ink will fill the tank automatically.
If ink flow does not start automatically or if it fills very slowly, carefully remove and reinsert the bottle.
183
To Next Page
Loading...
