IMPORTANT
Be careful not to fill the ink past the upper line above the maximum fill mark.
NOTE
• Be careful not to spill any ink when you refill the ink tank.
• Refill with all of the ink in the bottle, if it does not exceed the upper line.
6. When finished, remove the bottle, pulling the nozzle slowly so the ink does not spill.
7. Replace the ink bottle cap.
NOTE
• If any ink remains in the ink bottle, seal the cap tightly and store the ink bottle upright on a level
surface in a cool, dark place.
• Avoid tilting the ink bottle or storing it on its side; it may leak.
8. Remove the cap from inside the ink cover and seal the ink tank.
9. Repeat these steps for each ink tank you want to refill.
10. Close the ink tank cover.
• (DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W) After refilling the ink, press and hold (Paper)
and (Copy Shortcut) simultaneously for three seconds.
• If the Ink LED is lit or flashing, press
(Stop).
184
To Next Page
Loading...
