Brother DCP-T430W - Set the Date and Time

Home > Machine Settings > Change Machine Settings Using Web Based Management > General
Settings > Set the Date and Time
Set the Date and Time
Make sure the date and time setting is set correctly using Web Based Management, so the machine's time
matches the time being used by the server providing authentication.
1. Start Web Based Management. See Access Web Based Management.
2. In the left navigation bar, select Administrator > Date&Time.
If the left navigation bar is not visible, start navigating from .
3. Clear the Synchronize with SNTP server checkbox.
4. In the Date fields, enter the date.
5. In the Time fields, enter the time.
6. Select Submit.
Related Information
• General Settings
222