Brother DCP-T430W - Change the Login Password Using Web Based Management

Home > Machine Settings > Change Machine Settings Using Web Based Management > Change the Login
Password Using Web Based Management
Change the Login Password Using Web Based Management
The default password to manage this machine’s settings is located on the back of the machine and marked
"Pwd". Change the default password by following the on-screen instructions when you first log in. We
recommend immediately changing the default password to protect your machine from unauthorised access.
1. Start Web Based Management. See Access Web Based Management.
2. Do one of the following:
• If you have previously set your own password, type it, and then select Login.
• If you have not previously set your own password, type the default login password, and then select Login.
3. In the left navigation bar, select Administrator > Login Password.
• The default password to manage this machine’s settings is located on the back of the machine and
marked "Pwd".
• If the left navigation bar is not visible, start navigating from .
4. To change the password, type your current password in the Enter Old Password field.
5. Following the on-screen Login Password guidelines, type your new password in the Enter New Password
field.
6. Retype the password in the Confirm New Password field.
7. Select Submit.
You can also change the lockout settings in the Login Password menu.
Related Information
• Change Machine Settings Using Web Based Management
Related Topics:
• Check Your Machine's Password
218