Brother DCP-T430W - Scan Using Airprint (Macos)

Home > Mobile Connect > AirPrint > Scan Using AirPrint (macOS)
Scan Using AirPrint (macOS)
Related Models: DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W
Before scanning, make sure your machine is in the scanner list on your Mac computer.
1. Load your document.
2. Do one of the following:
• macOS v14 and macOS v13
Select System Settings from the Apple menu.
• macOS v12
Select System Preferences from the Apple menu.
3. Select Printers & Scanners.
4. Select your machine from the scanner list.
5. Do one of the following:
• macOS v14 and macOS v13
Click the Open Scanner… button.
• macOS v12
Click the Scan tab, and then click the Open Scanner… button.
The Scanner screen appears.
6. Select the destination folder or destination application from the destination setting pop-up menu.
7. Click Show Details to change the scanning settings if needed.
You can crop the image manually by dragging the mouse pointer over the portion you want to scan when
scanning from the scanner glass.
8. Click Scan.
Related Information
• AirPrint
147