Brother DCP-T430W - Clean the Paper Feed Rollers

Home > Routine Maintenance > Clean Your Brother Machine > Clean the Paper Feed Rollers
Clean the Paper Feed Rollers
If the paper feed rollers are stained with ink or have a buildup of paper dust, it may cause paper feed problems.
WARNING
Be sure to unplug the machine from the electrical socket before cleaning the paper feed rollers to avoid
an electrical shock.
1. Unplug the machine from the electrical socket.
2. If the paper support flap is open, close it, and then close the paper support.
3. Pull the paper tray (1) completely out of the machine as shown by the arrow.
1
4. Lift the paper support (1), and then pull it at an angle completely out of the machine as shown by the arrow.
1
5. Squeeze both green levers together, and then lower the maintenance unit (1).
1
6. Clean the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water, using a side-to-side motion.
After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
1
7. Raise the maintenance unit.
196