Home > Machine Settings > Change Machine Settings Using Web Based Management > General
Settings > Set the Machine to Power Off Automatically Using Web Based Management
Set the Machine to Power Off Automatically Using Web Based
Management
The Auto Power Off feature can reduce power consumption. If the machine does not receive any jobs for a
certain length of time, based on your model and settings, the machine will automatically enter Power Off mode.
The machine will not go into Power Off mode if it is connected to a network, a USB cable, or Wiress Direct. The
available features and interfaces vary depending on the model.
To turn on the machine after the Auto Power Off feature has turned it Off, press
(Stop).
1. Start Web Based Management. See Access Web Based Management.
2. In the left navigation bar, select General > Auto Power Off.
If the left navigation bar is not visible, start navigating from .
3. Select the Auto Power Off drop-down list, and then select the option you want.
4. Select Submit.
Related Information
• General Settings
Related Topics:
• Set Sleep Mode Countdown
• Set the Machine to Power Off Automatically Using the Machine's Control Panel
221
To Next Page
Loading...
