Home > Network > Network Features > Use Global Network Detection Features > Enable/Disable Global IP
Address Detection
Enable/Disable Global IP Address Detection
Related Models: DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W
Use this feature to check your machine's IP address. When your machine is assigned to a global IP address, an
alert is displayed on the machine.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your
machine's IP address).
For example:
https://192.168.1.2
You will find your machine's IP address in the Network Configuration Report.
See Print the Network Configuration Report.
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the back of the machine and marked
"Pwd". Change the default password by following the on-screen instructions when you first log in.
4. In the left navigation bar, click Network > Security > Global IP Address Detection / IP Filter.
If the left navigation bar is not visible, start navigating from
.
5. In the Global IP Address detection option, click Enabled or Disabled.
6. Click Submit.
Related Information
• Use Global Network Detection Features
Related Topics:
• Access Web Based Management
135
To Next Page
Loading...
