Brother DCP-T430W - Page 130

Home > Network > Wireless Network Settings > Use Wireless Direct > Configure Your Wireless Direct
Network
Configure Your Wireless Direct Network
Related Models: DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W
1. Press (Wi-Fi) and (Copy Shortcut) simultaneously.
Wireless Direct is enabled and the machine starts printing the Wireless Direct Information Sheet.
2. Activate the Wi-Fi function on your wireless device and search for your Brother machine.
3. Select your Brother machine's SSID (Network Name) on your wireless device (DIRECT-#####-
####_BR####).
4. Enter the Network Key (Password) when prompted.
• The SSID and Network Key are printed on the Wireless Direct Information Sheet.
• To disable Wireless Direct:
a. Press
(Wi-Fi) and (Stop) simultaneously.
The Power LED, Paper Warning LED, and Ink LED light up for one second, and then the Wi-Fi
LED starts flashing.
b. Press (Copy Shortcut).
Related Information
• Use Wireless Direct
125