Brother DCP-T430W - Page 16

5. Colour Copy
Press to start making copies in full colour.
6.
(Wi-Fi)
• Press the button by itself or simultaneously with another button to configure the wireless settings or print
network reports. Use only when the machine is idle.
• Press this button and Colour Copy simultaneously to restart the Wi-Fi if you cannot connect to your
wireless network.
• Press simultaneously with
(Stop) to access the Wi-Fi Mode.
7. Wi-Fi LED
Indicates the wireless network status.
Connected (Lit)
Connecting (Flashing)
Off
8. Power LED
Indicates the machine's status.
9. (Stop) Power On/Off
• Press to stop an operation.
• Press to exit from a selected mode.
• Press
(Stop) to turn on the machine.
Press and hold down
(Stop) to turn off the machine and cancel all of the remaining operations. The
Power LED flashes and stays on for a few seconds before turning itself off.
If you turn off the machine using (Stop), it will still clean the print head periodically to maintain print
quality. To prolong print head life, provide better ink efficiency, and maintain print quality, keep your
machine connected to a power source at all times.
10. Ink LED
Indicates when the machine detects an ink error or is in Maintenance Mode.
11. Paper Warning LED
Indicates when the machine detects an error or is in Reset Mode.
Related Information
• Introduction to Your Machine
Related Topics:
• LED Patterns and Indications
11