Brother DCP-T430W - Page 221

Start from Brother iPrint&Scan (Windows/Mac)
For Mac:
Brother iPrint&Scan is available only for DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W.
1. Start Brother iPrint&Scan.
• Windows
Double-click the (Brother iPrint&Scan) icon.
• Mac
In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon.
The Brother iPrint&Scan screen appears.
2. If your Brother machine is not selected, click the Add Machine / Select your Machine button, and then
select your model's name from the list. Click OK.
3. Click the Supplies/Machine Settings button.
If the Supplies/Machine Settings window appears, click the All Settings link.
Web Based Management appears.
4. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the back of the machine and marked
"Pwd". Change the default password by following the on-screen instructions when you first log in.
5. If you want to pin the navigation bar to the left side of the screen, click and then click .
You can now change the machine settings.
(DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W)
If you change the protocol settings, you must restart the machine after clicking Submit to activate the
configuration.
After configuring the settings, click Logout.
Start from Your Web Browser (DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W)
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your
machine's IP address).
For example:
https://192.168.1.2
Your machine's IP address can be found in the Network Configuration Report.
See Print the Network Configuration Report.
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
For example: https://SharedPrinter
• If you enable a NetBIOS name, you can also use the node name.
For example: https://brw123456abcdef
• The NetBIOS name can be found in the Network Configuration Report.
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the back of the machine and marked
"Pwd". Change the default password by following the on-screen instructions when you first log in.
4. If you want to pin the navigation bar to the left side of the screen, click and then click .
216