5. Using both hands, push one sheet of paper into the manual feed slot until the front edge touches the paper
feed rollers. Release the paper when you feel the machine pull it. The Power LED flashes three times to
indicate the manual feed slot is ready.
When loading an envelope, or a sheet of thick paper, push the media into the manual feed slot until you feel
the paper feed rollers pull it.
6. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
• If the document does not fit on one sheet, both the Power LED and the Paper Warning LED light up.
Place another sheet of paper in the manual feed slot, and then press Mono Copy or Colour Copy.
• Make sure printing has finished before you close the manual feed slot cover.
• When paper is placed in the manual feed slot, the machine always prints from the manual feed slot.
• The machine will eject paper loaded in the manual feed slot if a test page or report is printing.
• The machine will eject paper loaded in the manual feed slot during the machine's cleaning process.
Wait until the machine finishes its cleaning, and then load paper in the manual feed slot.
Related Information
• Load Paper
Related Topics:
• Choose the Right Print Media
• LED Patterns and Indications
28
To Next Page
Loading...
