Brother DCP-T430W - Page 87

Home > Scan > Scan Using the Buttons on Your Brother Machine > Web Services for Scanning on Your
Network (Windows 10 and Windows 11) > Configure Scan Settings for the Web Services Protocol
Configure Scan Settings for the Web Services Protocol
Related Models: DCP-T430W/DCP-T435W/DCP-T436W/DCP-T439W
1. Hold down the key and press the key on the computer's keyboard to launch Run.
2. Type "control printers" in the Open: field and click OK.
The Devices and Printers window appears.
If the Devices and Printers window does not appear, click View more devices > More devices and
printer settings.
3. Right-click the machine icon, and then select Scan profiles.... The Scan Profiles dialog box appears.
4. Select the scan profile you want to use.
5. Make sure the scanner selected in the Scanner list is a machine that supports Web Services for scanning,
and then click the Set as Default button.
6. Click Edit....
The Edit Default Profile dialog box appears.
7. Select the Source, Paper size, Color format, File type, Resolution (DPI), Brightness and Contrast
settings.
8. Click the Save Profile button.
These settings will be applied when you scan using the Web Services protocol.
If the machine prompts you to select a scanning application, select Windows Fax and Scan from the list.
Related Information
• Web Services for Scanning on Your Network (Windows 10 and Windows 11)
82