Brother MFC-3420C User Manual

ON-SCREEN PROGRAMMING 3 - 10
5.LAN
(MFC-3820CN
only)
1.Setup
TCP/IP
1
.
BOOT Method Auto
Static
RARP
BOOTP
DHCP
You can choose the
BOOT method that
best suits you needs.
See
Network
User’s
Guide
on the
CD-ROM
2.IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3
.
Subnet Mask
[000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Host Name BRN_XXXXXX Enter the Host name.
6
.
WINS Config Auto
Static
You can choose the
WINS configuration
mode.
7.WINS
Server
(Primary)
000.000.000.000
Specifies the IP
address of the
primary or secondary
server.
8.DNS Server (Primary)
000.000.000.000
Specifies the IP
address of the
primary or secondary
server.
9.APIPA On
Off
Automatically
allocates the IP
address from the
link-local address
range.
Main Menu Submenu Menu
Selections
Options Descriptions Page
The factory settings are shown in Bold.
to
accept
to
exit
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—
OR
—
Select & Set Select & Set

Brother MFC-3420C Specifications

General

Brand	Brother
Model	MFC-3420C
Category	All in One Printer
Language	English