What to do if Brother MFC-3420C says 'Ink Empty'?
If your Brother All in One Printer shows 'Ink Empty', this indicates that one or more ink cartridges are empty. Replace the empty ink cartridges.
How to fix 'Out of Memory' error on Brother MFC-3420C?
If your Brother All in One Printer shows the message 'Out of Memory', it means the device can’t store data in the memory. If you are faxing or copying, press Stop/Exit and wait until the other operations finish. Alternatively, clear the data in the memory. If you are printing, try reducing the print resolution.
Why does my Brother MFC-3420C All in One Printer show 'Comm.Error'?
If your Brother All in One Printer displays a 'Comm.Error' message, it indicates a communication error likely caused by poor phone line quality. Try the call again. If the problem persists, contact your telephone company to inspect your phone line.
How to resolve poor print quality on Brother All in One Printer?
If your Brother All in One Printer prints with poor quality, ensure that the Printer Driver or Paper Type setting in the menu matches the paper you're using. If using plain paper, try recommended paper types. Avoid handling the paper until the ink is dry and adjust the Vertical Alignment.
What does 'Check Original' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Check Original', it means the document scanned from the ADF was longer than about 90cm.
What to do if Brother MFC-3420C displays 'Check Paper Size'?
If your Brother All in One Printer displays 'Check Paper Size', it means that the loaded paper is not the correct size. Reload the correct size of paper (A4), and then press Mono Start or Colour Start.
What does 'Data Remains' mean on my Brother MFC-3420C?
If your Brother All in One Printer shows 'Data Remains', it means print data remains in the machine’s memory. Try re-starting printing from your computer. If the USB cable was unplugged during printing, press Stop/Exit to cancel the job and eject the page.
What to do if my Brother All in One Printer says 'Check Paper'?
If the Brother All in One Printer displays 'Check Paper,' it could be due to two reasons. First, the printer might be out of paper; in this case, add paper. Second, paper may be jammed inside the machine.
Why does my Brother MFC-3420C say 'High Temperature'?
If your Brother All in One Printer displays 'High Temperature', it means the print heads are too warm. Allow the machine to cool down.
What does 'Connection Fail' mean on Brother All in One Printer?
If your Brother All in One Printer displays 'Connection Fail', it means you tried to poll a fax machine that is not in Polled Waiting mode. Check the other fax machine’s polling setup.
General| Brand | Brother |
|---|---|
| Model | MFC-3420C |
| Category | All in One Printer |
| Language | English |
To Next Page
