What does 'Check Original' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Check Original', it means the document scanned from the ADF was longer than about 90cm.
What to do if Brother MFC-3420C displays 'Check Paper Size'?
If your Brother All in One Printer displays 'Check Paper Size', it means that the loaded paper is not the correct size. Reload the correct size of paper (A4), and then press Mono Start or Colour Start.
What does 'Data Remains' mean on my Brother MFC-3420C?
If your Brother All in One Printer shows 'Data Remains', it means print data remains in the machine’s memory. Try re-starting printing from your computer. If the USB cable was unplugged during printing, press Stop/Exit to cancel the job and eject the page.
How to fix 'Cover Open' error on Brother MFC-3420C All in One Printer?
If your Brother All in One Printer displays 'Cover Open', it means the scanner cover is not completely closed. Lift the scanner cover and close it again.
Why does my Brother MFC-3420C say 'High Temperature'?
If your Brother All in One Printer displays 'High Temperature', it means the print heads are too warm. Allow the machine to cool down.
What does 'Connection Fail' mean on Brother All in One Printer?
If your Brother All in One Printer displays 'Connection Fail', it means you tried to poll a fax machine that is not in Polled Waiting mode. Check the other fax machine’s polling setup.
What to do if my Brother All in One Printer says 'Check Paper'?
If the Brother All in One Printer displays 'Check Paper,' it could be due to two reasons. First, the printer might be out of paper; in this case, add paper. Second, paper may be jammed inside the machine.
What does 'Low Temperature' mean on my Brother MFC-3420C All in One Printer?
If your Brother All in One Printer displays 'Low Temperature', it means the print heads are too cold. Allow the machine to warm up.
What to do when Brother MFC-3420C says 'Near Empty'?
If your Brother All in One Printer displays 'Near Empty', it means one or more ink cartridges are running out of ink. Order a new ink cartridge.
Why does my Brother MFC-3420C say 'No Response/Busy'?
If your Brother All in One Printer displays 'No Response/Busy', it means the number you dialed does not answer or is busy. Verify the number and try again.
General| Brand | Brother |
|---|---|
| Model | MFC-3420C |
| Category | All in One Printer |
| Language | English |
To Next Page
