Brother MFC-7240 - Hook Switch PCB ASSY; Hook Actuator; Unfold Support Flap; Control Panel Cover Link

3-38
Confidential
9.13 Hook switch PCB ASSY / Hook actuator
(1) Release the hook switch PCB harness from the securing fixtures.
(2) Release the hook, and remove the hook switch PCB ASSY from the handset holder.
(3) Remove the hook actuator from the hook switch PCB ASSY.
Fig. 3-22
Harness routing : Refer to "17. Hook switch PCB ASSY/Control panel cover sensor".
9.14 Unfold support flap
(1) Remove the two bosses to remove the unfold support flap from the machine.
9.15 Control panel cover link
(1) Remove the two control panel cover links from the machine.
Hook
Hook actuator
Handset holder
Hook switch PCB ASSY
Hook switch PCB harness