5-19
Confidential
1.3.12 PC print function (Function code: 43)
<Function>
This function is used to change the settings of the various print functions summarized in the
table below.
<Operating Procedure>
(1) Press the [4] and [3] buttons in this order in the initial state of the maintenance mode.
"Manual Feed" appears on the LCD.
(2) Press the [ ] or [ ] button to select the function you want to change the setting and
press the [OK] button.
(3) When you select a fixed (On/Off) parameter, press the [ ] or [ ] button to change the
parameter setting, and press the [OK] button.
When you select a parameter requiring numerical value entry, use the keypad to enter a
numerical value, and press the [OK] button.
(4) When the [Stop/Exit] button is pressed, the machine beeps for one second and returns
to the initial state of the maintenance mode.
Function setting
LCD Description Set value
Initial
value
Manual Feed Switching of the Manual Feed On/Off Off
Resolution Resolution to print 300/600/1,200 dpi 600
Toner Save Switching of the Toner Save On/Off Off
Density Switching of the Density level -6 to 6 0
JB-Can Time Setting of the time until the host
time-out at the Job Cancel
0 to 225 (seconds) 4
Sleep Time Setting of the time until enter
the Sleep Mode
0 to 99 (minutes) 5
Page Protection Switching of the protection of
the page memory
Off/Letter/A4/Legal/Auto Off
Emulation Switching of the emulation Auto/HP/PS Auto
Auto I/F Time Switching of the I/F open time 1 to 99 (seconds) 5
Media Type Switching of the recording
paper type
Thin/Plain/Thick/Thicker/
Transparency/Recycled/
Bond/Envelopes/
EnvThin/EnvThick
Plain
or
Thin
Paper Size Switching of the area of develop
the image
Letter/Legal/A4/
Executive/B5/JISB5/A5/
B6/A6/Monarch/C5/
COM10/DL/DLL/A4Long/
PostCard/Folio
Letter
or
A4
Copies Switching of the print copies 1 to 99 (pages) 1
Orientation Switching of the print direction Portrait/Landscape Portrait
P-Pos X-Offset Switching of the offset print
position of the landscape
orientation
-500 to 500 (1/300 dpi) 0
P-Pos Y-Offset Switching of the offset print
position of the portrait
orientation
-500 to 500 (1/300 dpi) 0
AutoFF Switching of the auto form feed On/Off Off
To Next Page
Loading...
