Brother MFC-7240 - Page 195

3-71
Confidential
(2) Place the machine so that the main frame L ASSY is at the top.
(3) Release the low voltage power supply harness ASSY from the guide of the main frame L
ASSY.
(4) Remove the taptite bind B M4x12 screw 4a (for Under bar).
(5) Remove the taptite cup S M3x6 SR screw 5a (for Chute earth plate), the taptite bind B
M4x12 screw 5b (for PF frame ASSY) and the taptite cup S M3x6 SR screw 5c (for Earth
plate laser L).
(6) Release the hook to remove the feeder gear 17.
(7) Turn the feeder cam lever in the direction of the arrow, and remove the taptite bind B
M4x12 screw 7.
(8) Remove the taptite bind B M4x12 screw 8a and the two taptite cup S M3x6 SR screws
8b to remove the main frame L ASSY.
Fig. 3-61
Assembling Note :
• When assembling the main frame L ASSY, check that there is the chute earth plate on
the upper side of the earth plate main PCB.
Low voltage power supply harness ASSY
Taptite cup S M3x6 SR (8b)
Taptite cup S M3x6 SR (5c)
Main frame L ASSY
Feeder gear 17
Taptite bind B
M4x12 (7)
Feeder cam lever
Under bar
Chute earth plate
Taptite bind B M4x12
(4a)
Earth plate main PCB
<Top side view>
Chute earth plate
Taptite bind B M4x12
(8a)
Taptite bind B M4x12
(5b)
Taptite cup S M3x6 SR
(5a)