Brother MFC 7460DN

Brother PC-FAX Software (MFC models only)
100
6
Speed Dial setup 6
From the Brother PC-FAX Setup dialog box, click the Speed Dial (Facsimile style only) tab. (To use this
feature, you must choose the Facsimile style user interface.)
You can register a member or group on each of the ten Speed Dial buttons.
Registering an address in a Speed Dial button
6
a Click the Speed Dial button you want to program.
b Click the member or group you want to store on the Speed Dial button.
c Click Add >>.
Clearing a Speed Dial button
6
a Click the Speed Dial button you want to clear.
b Click Clear.
Note
You can select a speed dial from the PC-FAX interface to make sending a document easier & faster.
#1 Joe Smith XXX-XXX-XXXX