Printing and Faxing
134
8
Features in the BR-Script 3 printer driver (For MFC-7860DW)
(PostScript
®
3™ language emulation) 8
This section introduces the distinctive operations of the BR-Script 3 printer driver. For the basic operations of
the BR-Script 3 printer driver, see Features in the printer driver (Macintosh) on page 121 for Page Setup,
Cover Page, Paper Source and Layout.
• To use the BR-Script 3 printer driver, you need to set the Emulation to BR-Script 3 by using the
control panel before connecting the interface cable. (See Printer Emulation Support (For HL-2280DW and
MFC-7860DW) on page 2.)
• The BR-Script 3 printer driver does not support the PC-Fax Sending.
• If you want to setup the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at
http://solutions.brother.com/
and click Downloads on your model page to download the driver and visit
FAQ's for installation instructions.
• If you use a USB cable and Mac OS, only one printer driver for a machine can be registered in Printer
Setup Utility (Mac OS X 10.4.11) or Print & Fax in System Preferences (Mac OS X 10.5.x to 10.6.x). If
a Brother Laser driver is already listed in the Printer list, you will need to remove it and then install the
BR-Script 3 printer driver. For the information about removing the printer driver, see Removing the Printer
driver for Macintosh on page 133.
Choosing printing options 8
To control special printing features, choose Printer Features from the Print dialog box.
To Next Page
Loading...
