Confidential
vii
1.3.7 Operational Check of LCD (Maintenance mode 12) .................................. 5-19
1.3.8 Operational Check of Keys on Control Panel (Maintenance mode 13) ...... 5-20
1.3.9 EEPROM Dump and Log Information Saving (Maintenance mode 17) ..... 5-21
1.3.10 Updating of Firmware Using an External Memory
(Maintenance mode 28) ............................................................................. 5-22
1.3.11 Sensor Operational Check (Maintenance mode 32) .................................. 5-23
1.3.12 Printout of Dial Log (Maintenance mode 37) .............................................. 5-25
1.3.13 Backup of Machine Information (Maintenance mode 46) ........................... 5-26
1.3.14 Setting of Country/Language (Maintenance mode 52) .............................. 5-28
1.3.15 Transfer of Received FAX Data and/or Equipment's Log
(Maintenance mode 53) ............................................................................. 5-29
1.3.16 Fine Adjustment of Scanning Position (Maintenance mode 54) ................ 5-31
1.3.17 Acquisition of White/Black Level Data and CIS Scanner Area Setting
(Maintenance mode 55) ............................................................................. 5-32
1.3.18 Cartridge IC Communication Check (Maintenance mode 57) .................... 5-33
1.3.19 Updating of Paper Feeding Correction Values (Maintenance mode 58) .... 5-34
1.3.20 Checking of CIS Travel and Specifying of CIS Type
(Maintenance mode 59) ............................................................................. 5-40
1.3.21 Printout of PRN/JPEG Files in Memory Card (Maintenance mode 61) ...... 5-41
1.3.22 Move of the Head/Carriage Unit to the Adjustment Position
(Maintenance mode 63) ............................................................................. 5-42
1.3.23 Adjustment of Vertical Print Lines/Software Correction for Inclination/
Corrugation/Ruled Lines (Maintenance mode 65) ..................................... 5-43
1.3.24 Margin Adjustment in Borderless Printing (Maintenance mode 66) ........... 5-47
1.3.25 Updating of Head Property Data and Backup/Restoration of Head
Calibration Data (Maintenance mode 68) .................................................. 5-49
1.3.26 Traveling Speed Check of Head/Carriage Unit (Maintenance mode 69) ... 5-51
1.3.27 Customizing Destinations (Maintenance mode 74) .................................... 5-52
1.3.28 Move of the Head/Carriage Unit to the Center (Maintenance mode 75) .... 5-55
1.3.29 Purge Operation (Maintenance mode 76) .................................................. 5-56
1.3.30 Print of the Maintenance Information (Maintenance mode 77) .................. 5-59
1.3.31 Adjustment of Touch Panel (Maintenance mode 78) ................................. 5-61
1.3.32 Display of the Equipment's Log (Maintenance mode 80) ........................... 5-62
1.3.33 Equipment Error Code Indication (Maintenance mode 82) ........................ 5-65
1.3.34 Output of Transmission Log to the Telephone Line
(Maintenance mode 87) ............................................................................. 5-65
1.3.35 Assurance Mode Switch Setting (Maintenance mode 88) ......................... 5-66
2 OTHER SERVICE FUNCTIONS ................................................................................. 5-75
2.1 Cancellation of the Secure function lock ............................................................ 5-75
To Next Page
Loading...
Need help?
General
