5-42
Confidential
1.3.22 Move of the Head/Carriage Unit to the Adjustment Position (Maintenance mode
63)
< Function >
This function moves the head/carriage unit to the adjustment position.
< Operating Procedure >
(1) Press the 6 and 3 keys in this order in the initial stage of the maintenance mode.
The "SELECT 63?" appears on the LCD.
(2) Press the Mono Start key.
The "START 63" appears on the LCD.
(3) Press the * key.
The head/carriage unit moves to the adjustment position and the "HEAD ADJ" appears on
the LCD.
(4) After completion of adjustment jobs, press the X key.
The head/carriage unit returns to the home position and locks itself, then the machine
returns to the initial stage of the maintenance mode.
To Next Page
Loading...
Need help?
General
